Search results

Looking good. That is going to be one bad ass drive way. Love the three car garage too.

Woohoo...Can't wait!!...[like]

No issues to report here on black nappa leather. Is yours nappa leather?

Welcome and congratulations!!

no problems here. Dealer will be able to fix it under warranty.

Not in this case. That is not the Stinger emblem located on the rear of the car. Rather this is a thin metal sticker that, as seen on the photos posted, is just slightly thicker than a pieces of paper.

any photos of the damage? Did you inspect the car before driving off the lot?

yeah, too much.

Those look very good.

If the car is on safe boost mode, that means that the ECU stopped receiving signal from one of the sensors you unplugged. Check for bent pins on the connectors. Another symptom for a safe boost mode, is a boost leak. Check all your vacuum hoses and ensure they are properly attached and...

Welcome aboard, a quick search on the forum will get you all the information you seek.

Welcome aboard Joe. The red lady is looking good [twothumb]

Don't forget to disconnect the battery.

Also since you have the 4 cyl, remove the coils and remove the spark plugs to make sure there is no water inside the cylinders. You don't want to crank it again if there is water in there.

Also, if you can try making sure the exhaust is clean of any debris. if you can unbolt the rear mufflers to let the water out, that will be great.

before you crank it again, check the intake air boxes, make sure there is no water there. Remove the filters if they are wet. If the boxes are wet remove the intake pipes and make sure there is no water in them.

came out from the exhaust? the engine bay? or underneath the car?

did water get in to the battery area? are lights on the dash coming on at least?

WTH!!!!....DUDEE!!!!......Any chance you can get it to the drive way behind? The engine will run, the intake are on the upper grill. need to get that water out of the exhaust.

Yes, they can be adjusted. The headlight adjustment is behind the headlight on each side under where the fender and hood meet. Generally there is a screw to adjust the height. You will need to remove the air filter box which I think is just 3 bolts and a hose clamp. There is a 12mm nut on...